Cluster A • Native SPL 0x09 CloseAccount Architecture • M002

Free Sol Incinerator Alternative: Direct SPL 0x09 CloseAccount Without Wrapper Program Skims

Why route your wallet's empty token accounts through a closed-source intermediary contract that skims ~2% to 5% of your SOL? Every standard SPL ATA holds 2,039,280 lamports (0.00203928 SOL) that belongs 100% to the account authority. Unlike Sol Incinerator (~2%–5% fee) and ClaimYourSol (5%+ fee), Solana Rent & Rug Shield builds clean, unsigned native Tokenkeg and Token-2022 0x09 CloseAccount instructions returning 100% on your 1st claim, paired with a sticky 30% ?ref= atomic split and 11-Layer Block-0 Jito/Sybil defense surpassing RugCheck, SolSniffer, and GoPlus.

Reclaim 100% SOL With Native CloseAccount Open Zero-Fee 1st Claim App Get 30% ?ref= Link
Opcode 0x09
Direct Native SPL Token CloseAccount Instruction (Zero Opaque Wrapper CPI)
0.00203928 SOL
Exact 2,039,280 Lamports Credited Per Closed ATA on Your 1st Claim
Zero Custody
Client-Side Unsigned TX Verified by Phantom, Solflare, Backpack & Ledger
30% ?ref= Split
Instant Atomic Referrer Payout (+50% Higher Than 20% Custodial Ledgers)
Interactive Mainnet Lamport Calculator • Unit M002

Live Empty ATA Rent & Competitor Fee-Leak Simulator

Adjust your empty SPL Associated Token Account count below to compute exact 2,039,280 lamports (0.00203928 SOL) principal recovery on your 0% fee 1st claim versus Sol Incinerator (~2%–5%), ClaimYourSol (5%), and RefundYourSol (15%).

0.509820 SOL
Rent & Rug Shield 1st Claim (0.0% Fee • 509,820,000 lamports)
-0.010196 SOL
Lost on Sol Incinerator (~2.0% Close / up to -0.025491 SOL at 5% Burn)
-0.025491 SOL
Lost on ClaimYourSol / SolCleaner (5.0% Skim)
-0.076473 SOL
Lost on RefundYourSol (15.0% Relayer Skim)

Native SPL Opcode 0x09 vs Closed-Source Wrapper Programs

When you sign a transaction on Sol Incinerator, your wallet invokes custom program F6fmDVCQfvnEq2KR8hhfZSEczfM9JK9fWbCsYJNbTGn7, which executes Cross-Program Invocations (CPIs) to close your token accounts and simultaneously route a percentage of your recovered lamports to fee vault burn68h9dS2tvZwtCFMt79SyaEgvqtcZZWJphizQxgt. Because the instruction targets a third-party program ID rather than canonical SPL Token directly, hardware wallets like Ledger often warn about unrecognized contract data.

Solana Rent & Rug Shield eliminates opaque wrapper contracts completely. Our transaction builder emits canonical SPL Token (TokenkegQfeZyiNwAJbNbGKPFXCWuBvf9Ss623VQ5DA) and Token-2022 (TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb) CloseAccount (discriminator 0x09) instructions where destination equals your own wallet pubkey. On your first wallet claim, zero protocol fee transfer instruction is appended—you keep 2,039,280 out of 2,039,280 lamports.

Canonical SPL Token CloseAccount (0x09) Instruction Layout vs Wrapper CPI
// Direct Native CloseAccount Instruction (Solana Rent & Rug Shield Claim #1)
Program ID : TokenkegQfeZyiNwAJbNbGKPFXCWuBvf9Ss623VQ5DA
Data       : [0x09]  // 1-byte discriminator: TokenInstruction::CloseAccount
Accounts   :
  [0] writable          empty_ata_pubkey   (balance == 0, lamports == 2,039,280)
  [1] writable          owner_wallet       (receives +2,039,280 lamports directly)
  [2] signer, readonly  owner_wallet       (sole authority; 0 delegate approvals)

Why Repeat Cleanups at 1.5% Still Beat Every Solana Cleaner on Mainnet

After your 100% free first wallet claim proves the exact +0.00203928 SOL per ATA credit in your own wallet history, ongoing repeat cleanups on Solana Rent & Rug Shield carry a transparent 1.5% (150 bps) fee—25% lower than Sol Incinerator's 2.0% close fee, 70% lower than ClaimYourSol and SolCleaner (5.0%), and 90% lower than RefundYourSol's 15%+ relayer skims.

Better yet, when a visitor arrives via a creator or whale ?ref=<Wallet> link, 30% of any repeat cleanup fee or institutional pass ($19.99 / $49.99 / $99 / $500) settles atomically into the referrer's wallet in the exact same Solana block—with zero off-chain custody or payout delays.

100-ATA First Claim & Repeat Comparison (Gross = 0.20392800 SOL)
Provider                    | Claim #1 Net SOL | Repeat Net SOL | Custody / Security
----------------------------+------------------+----------------+------------------------------
Solana Rent & Rug Shield    |  0.20392800 SOL  | 0.20086908 SOL | Native 0x09 + 11-Layer Shield
Sol Incinerator             |  0.19984944 SOL  | 0.19984944 SOL | Custom CPI + 0 Rug Layers
ClaimYourSol / SolCleaner   |  0.19373160 SOL  | 0.19373160 SOL | 5% Skim + 0 Rug Layers
RefundYourSol               |  0.17333880 SOL  | 0.17333880 SOL | 15% Skim + 0 Rug Layers

Integrated 11-Layer Pre-Buy Shield vs RugCheck, SolSniffer & GoPlus

Standalone account cleaners wait until you have already been rugged to profit off burning your dead bags. Meanwhile, legacy scanners like RugCheck, SolSniffer, and GoPlus rely on static Mint/Freeze flags and cached REST endpoints that completely miss coordinated 15-wallet Block-0 Jito bundles and malicious Token-2022 TransferHook extensions.

By combining a 0%-fee first SOL rent recovery engine with our live 11-Layer Rug Shield on the same non-custodial dashboard, traders reclaim trapped capital and immediately protect it with sub-120ms upstream Sybil funding graph verification.

Instruction Transparency & Security Comparison

Architecture FeatureSolana Rent & Rug ShieldSol IncineratorClaimYourSol / Legacy Cleaners
On-Chain Program InvokedNative Tokenkeg & Token-2022 (0x09)Closed-source F6fmDVC.. wrapperMulti-transfer relayer wrappers
First Claim Net Return100% (2,039,280 lamports / ATA)95.0% to 98.0% returned80.0% to 95.0% returned
Ledger Clear-Sign SupportNative SPL instruction clear-signsOften requires blind-sign toggleOpaque instruction bundles
Pre-Buy Sybil Graph (Layer 11)Blocks >20% Block-0 Jito bundlesNot supportedMissed by RugCheck / SolSniffer / GoPlus
Inner-CPI Drainer Check (Layer 9)Simulates nested Approve/SetAuthorityNot supportedStatic check only
Referral Settlement30% Atomic On-Chain ?ref= Split20% Off-Chain Memo Ledger20% or custodial

Switch From Sol Incinerator in Under 60 Seconds

Step 1: Open the Live Non-Custodial Scanner

Navigate to rentandrugshield.com/#scanner from desktop or mobile wallet browser with zero registration or email required.

Step 2: Audit Empty SPL & Token-2022 Accounts

Inspect every closeable zero-balance account alongside quarantined frozen honeypots so batch simulation succeeds cleanly.

Step 3: Sign Native 0x09 CloseAccount Batch

Verify in Phantom, Solflare, or Ledger that 100% of 2,039,280 lamports per ATA routes directly to your pubkey on Claim #1.

Step 4: Share Your 30% ?ref= Wallet Link

Paste your pubkey in the affiliate generator below to earn 30% atomic splits whenever trading peers upgrade passes or run repeat cleanups.

Frequently Asked Questions

Is Solana Rent & Rug Shield really 0% fee on the first wallet claim?

Yes. Your first wallet rent claim deducts 0 protocol lamports—you receive the full 2,039,280 lamports (0.00203928 SOL) per closed standard SPL ATA, paying only Solana's ~0.000005 SOL base network signature fee.

Why is native 0x09 CloseAccount safer than third-party cleaner contracts?

Opcode 0x09 in the official Solana SPL Token program can only close an account whose token balance is strictly zero (unless explicitly burned first) and requires the owner's signature, eliminating opaque wrapper contract risks.

Can I close both standard SPL and Token-2022 empty accounts?

Yes. Our scanner detects both Tokenkeg (2,039,280 lamports) and Token-2022 accounts (2,039,280 to 2,157,600+ lamports depending on TLV extensions) while quarantining frozen traps.

How does your 11-Layer Shield outperform RugCheck, SolSniffer, and GoPlus?

RugCheck, SolSniffer, and GoPlus focus on surface authority flags that scammers spoof. Our 11-Layer engine adds Layer-9 Inner-CPI drainer simulation, Layer-10 live Token-2022 TLV byte auditing, and Layer-11 Block-0 Jito/Sybil funding graph detection.

Institutional Pricing Ladder ($0 Free 1st Claim + $19.99 / $49.99 / $99 / $500 Passes)

New layers included free during active pass, $0 auto-billing. Settle instantly in SOL, SPL USDC, Stripe Card, or autonomous HTTP 402 (x402).

Free 1st Claim & 24h Trench Pass

$0 Free 1st Scan & 0% 1st Claim

Keep 2,039,280 / 2,039,280 lamports (0.00203928 SOL) on your first wallet claim vs Sol Incinerator ~2% and ClaimYourSol 5%. Extra single 11-Layer scan: $0.10. 24h Trench Pass: $1.99.

Launch Live Scanner

30-Day Trader Pro

$19.99/mo$39.99/mo

Unlimited Web & Telegram 11-Layer pre-buy audits including Layer-11 Block-0 Jito/Sybil Cluster Defense, beating RugCheck, SolSniffer, and GoPlus.

Activate $19.99 Trader Pro

30-Day Ultra Pro + Sniper Bot API

$49.99/mo$99.00/mo

15,000 API calls/mo ($0.0033/call) + real-time Rug Webhooks + Layer-11 Block-0 Sybil & Token-2022 TLV flags for automated trading bots.

Get $49.99 Sniper Bot API

30-Day Quant Desk Pro API

$99.00/mo$199.00/mo

100,000 API calls/mo ($0.00099/call), <120ms Priority SLA + Batch Sybil funding graph endpoints & Streamable HTTP MCP.

Unlock $99 Quant Desk API

Enterprise Unlimited API

$500/mo$999/mo

Unlimited B2B RPC-backed 11-Layer scoring feeds for wallets, DEX terminals, and launchpads with 100+ RPS throughput and 99.95% SLA.

Provision $500/mo Enterprise SLA

Autonomous HTTP x402 & MCP

x402 v2 Zero-Signup Agent Pay

Machine-native Solana USDC & SOL settlement via /api/x402/v2 and /mcp with 14,640h Mainnet telemetry proof.

Inspect x402 & MCP Spec
Zero-Custody On-Chain Affiliate Engine (3,000 bps)

Earn a Sticky 30% Atomic ?ref= Split (+50% Higher Than 20% Programs)

Paste any valid Solana wallet address to generate your shareable ?ref=<Wallet> link. Every referred pass checkout ($1.99 / $19.99 / $49.99 / $99 / $500) or repeat rent cleanup splits 30% directly to your wallet inside the same unsigned Solana transaction with zero custody, zero withdrawal minimums, and automatic self-referral protection.

Related Solana Security & Rent Forensics Guides

Unit M001 • Cluster A

Sol Incinerator Fee Calculator vs 0% 1st Claim (2,039,280 Lamport Math)

Calculate exact Sol Incinerator 2% to 5% burn fees vs Solana Rent & Rug Shield: keep 100% of 2,039,280 lamports (0.00203928 SOL) on your 1st claim + 11-Layer Shield.

Unit M003 • Cluster A

Solana NFT & cNFT Burn Rent Calculator vs Sol Incinerator 5% Fee

Calculate exact SOL recovered from Metaplex NFTs, Master Editions, SPL ATAs (2,039,280 lamports / 0.00203928 SOL) & cNFTs vs Sol Incinerator 5% fee + 11-Layer Shield.

Unit M004 • Cluster A

How to Burn Scam Airdrop Tokens on Solana Safely (0% 1st Claim + Quarantine)

Burn scam Solana airdrop dust & close empty ATAs safely without triggering Token-2022 hooks or paying Sol Incinerator 5% fees. Keep 2,039,280 lamports + 11-Layer Shield.

Unit M005 • Cluster A

Sol Incinerator 20% Referral vs 30% Zero-Custody ?ref= Atomic Split

Compare Sol Incinerator's 20% custodial Memo referral dashboard vs Solana Rent & Rug Shield's 30% zero-custody ?ref= atomic on-chain split + 0% 1st claim & 11-Layer Shield.

Unit M009 • Cluster B

RefundYourSol 15%–28.8% Skim Forensics vs 0% 1st SOL Rent Claim

On-chain forensics exposing RefundYourSol's 15% to 28.8% empty ATA recovery fees vs Solana Rent & Rug Shield: 0% 1st claim (2,039,280 lamports) + 11-Layer Shield.

Unit M016 • Cluster C

Pump.fun Block-0 Jito Bundle Detector: <120ms Layer-11 Sybil Audit

Catch Pump.fun Slot-0 Jito bundles in <120ms with 11-Layer Shield. Reclaim 2,039,280 lamports (0.00203928 SOL) on 0% 1st claim plus 30% ?ref= split.